Chapter 1
Status LED indications
The Status LED (light emitting diode) will flash and change colour depending on the machine’s status.
LED | Machine Status | Description |
|
|
|
| Sleep Mode | The power switch is off or the machine is in Sleep mode. |
|
|
|
| Warming Up | The machine is warming up for printing. |
Green |
|
|
(blinking) |
|
|
|
|
|
| Ready | The machine is ready to print. |
Green |
|
|
|
|
|
| Receiving Data | The machine is either receiving data from the computer, |
|
| processing data in memory, or printing data. |
Yellow |
|
|
(blinking) |
|
|
|
|
|
| Data Remaining | Print data remains in the machine memory. |
Yellow | in Memory |
|
|
| |
|
|
|
| Service error | Follow the steps below. |
Red |
| 1. Turn off the power switch. |
| 2. Wait a few seconds, and then turn it back on and try to print | |
|
| |
(blinking) |
| again. |
|
| If you cannot clear the error and you see the same service call |
|
| indication after turning the machine back on, please call your |
|
| Brother dealer for service. |
|
|
|
8