112 C H A P T E R F O U R T E E N

Checklist for the MFC:

The default setting for MF Link mode is PC PRIMARY in this setting all faxes will be routed into the PC unless it is not turned on. If the PC is turned off, incoming faxes will be printed on the MFC.

1 To make sure the MF Link mode is set to PC PRIMARY, press Function , 7 , 8 .

2Use or to select PC PRIMARY.

3Press Set .

4Press Stop to exit.

On your PC:

1In the Main Menu, select the Setup pull-down menu.

2Select Preferences...

3Under Answer Mode, select Fax only.

4Click the OK button.

5Make sure the MFC is connected to the PC.

6Keep the PC and the Multi-Function Link Main Menu running at all times.

Viewing Received Faxes

Faxes that are received into the PC will appear in the InBox of the Log Manager. To access the Log Manager, from the Main Menu click the Log Manager button

—OR—From the Start pull-down menu, select Mail/Log.

1In the Log Manager, select the Fax folder.

2Then select the InBox folder. A listing of your incoming messages will appear on the right side of the window.