50 C H A P T E R S E V E N

Multiple Resolution Transmission

Use this feature to select separate resolution settings for each page of the fax you’re sending. This could be useful if you’re sending a fax with photos and letters, or some pages with small print and others with normal print. Resolution settings return to STANDARD after the fax is sent.

1Insert documents in feeder, then press Function , 1 , 5 .

2Use or to select resolution for page 1, then press Set .

3Repeat Step 2 for subsequent pages. Press Stop when you’re finished.

4Enter the fax number you’re calling, and press Start .

Receiving Faxes

See

F/T Ring

Time

p. 36

See

Easy Receive

pp. 34-35

Operation from Extension Telephone

If you answer a fax call on an extension phone, you can make your FAX/MFC take over by using the Activation Code. When you press the Activation Code

5 1 , the FAX/MFC starts to receive a fax.

If the FAX/MFC answers a voice call and double-rings for you to take over, use the

Deactivation Code

5 1 to take the call at an extension phone.

If you answer a call, and no one is on the line, assume you’re receiving a fax. At the FAX/MFC phone, press Start , then hang up. At an extension phone, press

51 , wait for fax receiving tones (chirps), then hang up. (Your caller will have to press Start to send the fax.)

For F/T (Fax/Tel) Mode Only

When the FAX/MFC is in F/T mode, it will use the F/T Ring Time (double ringing) to alert you to a voice call. If you’re at the FAX/MFC, you can lift the handset to answer.

If you’re at an extension phone, you’ll need to lift the handset during the F/T

Ring Time and press

 

 

 

 

 

5 1 between the double rings. If no one is on the

line, or if someone wants to send you a fax, send the call back to the FAX/MFC by

pressing

5 1 .