A D V A N C E D F A X O P E R A T I O N | 51 |
| |
|
|
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Activation
Code is | 5 1 . The preset Deactivation Code is | 5 1 . |
If you are always disconnected when accessing your TAD remotely, try changing
the Activation Code from | 5 1 to | and the Deactivation Code | |
from | 5 1 to 9 9 | 9 . |
|
To change Remote Codes
1Press Function , 7 , 5 .
2Press 
or 
to select ON (or OFF).
REMOTE ACT.:ON
3Press Set when the screen displays the setting you want.
4If you want to, enter a new Remote Activation Code, then wait 2 seconds.
ACT.CODE:*51
5If you want to, enter a new Remote Deactivation Code, then wait 2 seconds.
DEACT.CODE:#51
6Press Stop to exit.
Distinctive Ringing
This FAX/MFC feature lets you use the Distinctive Ringing subscriber service offered by some telephone companies, which allows you to have several telephone numbers on one phone line. Each phone number has its own Distinctive Ringing pattern, so you know which phone number is ringing. This is one way you can have a separate phone number for your FAX/MFC.
Your FAX/MFC has a Distinctive Ringing function, allowing you to dedicate one phone number just for receiving faxes. You’ll need to follow the directions below to “register” the Distinctive Ringing pattern, so your FAX/MFC can recognize its incoming calls. You will need another person standing by on another line to help you with Step 6 of this registration.
You can change or cancel the Distinctive Ringing pattern at any time. You can switch it off temporarily, then turn it back on. When you get a new fax number, make sure you reset this function.