I N S T A L L A T I O N

15

 

 

 

Do not connect a TAD elsewhere on the same phone line—your FAX/MFC and TAD will both try to control the line.

Connections

The external TAD must be plugged into the left side of the FAX/MFC, into the jack labeled EXT. Your FAX/MFC cannot work properly if you plug the TAD into a wall jack.

1Plug the telephone line cord from the wall jack into the left side of the FAX/ MFC, in the jack labeled LINE.

2Plug the telephone line cord from your TAD into the left side of the FAX/MFC, in the jack labeled EXT. (Make sure this cord is connected to the TAD at the TAD’s telephone line jack, and not its telephone set jack.)

3Set your external TAD to 4 rings or less. (The FAX/MFC’s Ring Delay setting does not apply).

4Record the outgoing message (see below).

5Set the TAD to answer calls.

6Set Message Storage ( Function , 8 , 1 ) to VOICE:EXT..

7Set the Answer Mode to MC:MSG CTR.