Brother GT541, GT-%$! instruction manual Cleaning the Carriage Shafts, Do not move the Print Heads

7. Troubleshooting

7-2-9. Cleaning the Carriage Shafts

If the error message “Fail: CRG Speed” or “Fail: CRG Stop 1” is displayed, the Carriage Shafts might be smudged with inks and dusts. Clean and oil the Carriage Shafts following the procedure below.

(1)Turn off your printer.

(2)Open the Front Cover by unlocking the Cover Locks with both hands

(3)Wipe the Carriage Shafts with a cloth soaked with alcohol. <Note>

Do not move the Print Heads.

Print Heads

Carriage Shafts

(4)Soak a cloth with sewing oil and use it to apply the sewing oil on the Carriage Shafts.

(5)Close the Front Cover.

(6)Turn on your printer.

(7)Adjust the timing of firing. See "7-2-8. Adjustment after the Print Head replacement".

GT-541

95