Brother GT-%$!, GT541 instruction manual Checking Print Quality with Nozzle Check Pattern

7. Troubleshooting

7-2-3. Checking Print Quality with Nozzle Check Pattern

You can identify which Print Head has the problem by using the Nozzle Check Pattern.

(1)Install the Platen 14 x 16 (see “4-4. Uninstalling / Installing the Platen”).

(2)Set the Platen height to the “A” position (see “4-5. Placing the T-shirt on the Platen”).

(3)Place a sheet of paper (A4 or letter size) at the right corner of the Platen as shown below. You can use a T-shirt instead of paper (see “4-5. Placing the T-shirt on the Platen”).

Paper

(4)Press the OK Button to open the Menu Display.

(5)Press the Up/Down Button to select “Test Print”, and then press the OK Button.

(6)Press the Up/Down Button to select “Nozzle Check”, and then press the OK Button. The following message appears.

(7) Press the OK Button to start printing the Nozzle Check Pattern.

GT-541

80