
7. Troubleshooting
7-2. Solving Print Quality Problems
Use the table below to solve print quality problems.
Problem | Cause | Solution |
Print is faded. | The graphic application’s | See |
| settings are not appropriate. | Application’s Print Condition" |
| Maybe CYMK mode is being | and modify the artwork. |
| used for data. |
|
| The print condition is not | See |
| appropriate. | Driver Condition” and select |
|
| proper Vivid Processing & Ink |
|
| Volume. |
| Ink in the Ink Cartridge may be | See |
| getting low. | Cartridge”. |
Your print has horizontal stripes | Some nozzles misfired by | Press the Head Cleaning Button |
(banding). | checking the Nozzle Check | to clean the Print Heads. Or |
| Pattern (see | select "Head Cleaning" menu |
| Print Quality with Nozzle Check | and try "Powerful Cleaning". |
| Pattern "). The Print Heads need | After Head Cleaning, check the |
| to be cleaned. | nozzles with "Nozzle Check |
|
| Pattern. If repeating this 5 times |
|
| does not solve the problem, see |
|
| |
|
| Heads”. |
| Printing by wider gaps between | Select |
| Print Heads and printed medium | Direction. |
| or printing on very high | the Print Direction”. |
| absorbent material. |
|
The ink runs and blurs on the | Too much ink is used. | Adjust the Ink Volume. See |
edge. |
| |
|
| Volume”. |
| Using a thin | Adjust the ink volume. |
| made with 100% cotton. |
|
The outlines of printed image | The Platen height may be | Adjust the Platen Height. See |
are not clear, or texts and | wrong. with a too large gap.. | |
outlines are printed doubled. |
| Platen”. |
Print Heads hit garment | Keep the surface flat (esp. both | |
|
| edges) and take care in |
|
| removing the wet |
| The Platen Sheet needs to be | See |
| replaced and is dirty. | Sheet". |
Ink dots smudged yellow area | Select Yellow / Black Printing of | See |
where is next to black area. | Printer Driver. | Black Printing”. |
GT-541
75