Brother GT541, GT-%$! instruction manual 111, PRG SH Ilgl TMR

					7. Troubleshooting
Error		Message	Meaning		Solution
code
6110		Fail: BY EEP WRT	Failure in writing to EEPROM of	**
			BY
6111		Fail: BY FLSH ERS	Failure in clearing FLASH ROM of
			BY
6112		Fail: BY FLSH WRT	Failure in writing to FLASH ROM of	**
			BY
6113		Fail: BY FLSH CHK	Defect in FLASH ROM Check
			Sum of BY
6114		Fail: BY RAM Test	Defect in RAM check of BY	**
6134		Fail: Head VLTG	Print Head voltage defect	**
6150		Fail: Sur Temp	Ambient temperature sensor	**
			defect
6200		Fail: MNT Cap Drv	The operation stopped because
			the Cap Driver has overheated.
6210		Fail: MNT Pump Drv	The operation stopped because	**
			the Pump Driver has overheated.
6220		Fail: MNT Wipe Drv	The operation stopped because
			the Wipe Driver has overheated.
6230			The Maintenance Unit failed to
		Fail: MNT INK-PCBA	communicate with the Ink Sensor A	**
			PCB.
6240			The Maintenance Unit failed to
		Fail: MNT INK-PCBB	communicate with the Ink Sensor	**
			B PCB.
		PRG: SH SCER	Carriage initialization failed.
	1508
		PRG: SH SCER	Reading EEPROM Timeout (BY)
	1757
7000				**
		PRG: SH SCER	Writing EEPROM Timeout (BY)
	1788
		PRG: SH SCER	Communication timeout (SH to
		XXXX	BY)
7001			Error inside the program
		PRG: SH Exception	(Exceptionally occurs in CPU of	**
			SH)
7002		PRG: SH ILGL TMR	Error inside the program	**
			(Incorrect timer setting of SH)
7010		PRG: SH ILGLArg	Error inside the program	**
			(Argument defect of SH)
7011		PRG: SH ILGL RTN	Error inside the program
			(Returning value defect of SH)
7012			Error inside the program
		PRG: SH Event TO	(Time-out of waiting for the
			vent/message of SH)	**
7013		PRG: SH Internal	Error inside the program
			(General program error of SH)
7100		PRG: BY SYSCALL	Error inside the program
			(System call error of BY)
			GT-541

111