Brother GT-%$!, GT541 instruction manual Obstruction Sensor

4. Printing Directly from Applications

(9)Press the Platen Button to insert the Platen, and check the gap between the Obstruction Sensor and the T-shirt.

If the Platen height is appropriate, the space is around 2.0 mm. <Note>

Make sure you check the space when the Platen is moving, so that the Obstruction Sensor work properly. While the platen stops, it is in upper position.

If the Platen height is too high, the T-shirt, Print Head, or both of them may be damaged when printing.

Obstruction Sensor

(10)Press the Platen Button to eject the Platen.

If the Platen height is appropriate, you can go to “4-6. Printing” to start printing. If not, go on to the following steps.

(11)Loosen the Platen Fixing Lever.

(12)Adjust the Platen height by turning the Platen Height Adjustment Lever.

The “A” position is the highest. The Platen lowers as you turn the Platen Height Adjustment Lever to the right.

(13)Tighten the Platen Fixing Lever securely.

(14)Repeat steps (9) and (10) and check the Platen height.

Repeat steps (11) to (14) until the Plate height becomes appropriate.

GT-541

52