Brother GT-%$!, GT541 instruction manual Solving Application Problems, 102

7. Troubleshooting

7-3. Solving Application Problems

Problem	Cause	Solution
The image sent from Adobe	The Print Setup or	In Adobe Illustrator 10 follow the instruction
		below, and then try to send the print data
Illustrator 10 is printed 90 degree	Document Setup is
		again:
rotated.	not appropriate.
		(1) Open "Print Setup" in the "File" menu.
		(2) Select GT-541 as the printer, and then
		click “OK”.
		(3) Open "Document Setup" on "File" menu.
		(4) Check "Use Print Setup".
		(5) Confirm the "Orientation", "Width" and
		"Height".
		If they are not appropriate, correct them, and
		then click "OK".
The image sent from Adobe	The Print Setup or	With Adobe Illustrator CS, landscape image
Illustrator CS is printed 90	Document Setup is	may not be printed properly. Correct the
degree rotated.	not appropriate.	setting following the instruction below, and
		then try to send the print data again:
		(1) Open "Print" in the "File" menu.
		(2) Confirm that the Media Size is “Defined
		by Driver”.
		(3) Change the Media Orientation to the
		portrait.
		(4) If you are not changing the Platen size,
		skip to step (8). If you want to change the
		Platen Size, click “Setup…”, and then click
		“Continue”.
		Print window appears.
		(5) Click “Preference”.
		(6) Change the Platen Size in the Printer
		Driver Window, and then click "OK".
		(7) Click “Print” in the Print window.
		(8) Confirm the preview, and then click
		“Print” to send the data to your printer.

GT-541

102