CAUTION
Installation
Setting up and moving of the printer should only be carried out by a qualified technician.
The printer machine weighs approximately 100 kg. Transporting and setting up of the printer should be carried out by four or more people.
The machine must be transported using the correct handling points only. Do not use the cartridge housings to move the machine. The machine may fall down and cause injury.
The printer must be used on a suitable stable surface, otherwise it may tip over or fall down and cause injury.
Furthermore, the table that supports the printer should be at least 100 cm in width and 80 cm in depth, and should be able to bear a weight of 150 kg or more.
Do not set up the printer in a place where it will be affected by vibration. It may become unbalanced and fall down, which cause injury or damage to the printer.
Do not connect the power cord until setup is complete, otherwise the printer may operate if the power switch is turned on by mistake, which could result in injury.
Do not climb onto the printer or place heavy objects on top of it, otherwise it may become unbalanced and tip over or fall down and cause injury.
Printing
This printer should only be used by operators who are appropriately trained in its operation.
Ensure there is adequate space left for safe working. The Platen moves forward while operating and it may be injured.
Do not handle the platen while printing. If your hand gets caught between the platen or the
Do not move the Platen by hand.
The Printer may be mechanically and electrically damaged.
Do not put your hands inside the covers while the printer’s power is turned on, otherwise your hands may touch against moving parts and this may result in injury.
When a problem occurs with the operation of the printer, contact the place of purchase or a qualified technician.
Maintenance
Wait at least 1 minute after turning off the power switch before opening the front cover.
Do not touch the head heat sink as it may be HOT and may cause a burn.
Be careful not to get your fingers caught when closing the front cover, otherwise it may result in injury to your fingers.
Do not move the Platen by hand.
The Printer may be mechanically and electrically damaged.
Do not disassemble the ink cartridge or the waste ink cartridge.
Take care not to let the ink, waste liquid or wash liquid come into contact with your eyes or onto your skin, otherwise inflammation can result. In case of contact with eyes, do not rub but immediately rinse the eyes with water.
Furthermore, do not drink the ink, waste liquid or wash liquid under any circumstances, as they can cause vomiting and diarrhea.
Keep the ink, waste liquid and wash liquid out of the reach of children.
Use only the proper replacement parts as specified by Brother.
| iii |
