2. Identifying Your Printer’s Parts

2-6-3. Menu List

There are some differences in Left/Right menu. White Ink menus are in the right and CompactFlash and general menus are in the left control panels

 

Left Menu

 

 

Content

 

 

 

 

Executes Head Cleaning by one or all four Print Heads.

 

Head Cleaning

 

 

Refer to "7-2-2. Cleaning the Print Heads"

 

 

 

Normal： normal mis-firing

 

 

 

 

 

 

 

 

Powerful：After cleaning the Print Head nozzles, when normal head cleaning does not work.

 

 

 

 

Prints to check mis-firing and print quality.

 

Test Print

 

 

Nozzle Check： shows mis-firing

 

 

 

 

Standard Check： shows general print quality

 

Card Data Load

 

Reads print data (ARP file) in CompactFlash. The inside folder shows with [...].

 

 

 

 

Sets the print direction. This setting is prior to Printer Driver setting.

 

 

 

 

Auto： Default bi-directional, Printer Driver setting is available.

 

Print Direction

 

 

Always Uni- ： always prints uni-directionally.

 

 

 

 

Always Bi- ： always prints bi-directionally.

 

 

 

 

Refer to "7-2-4. Changing the Print Direction".

 

 

 

 

Goes into the maintenance submenu.

 

 

 

 

Cap/Wiper Clean： "6-1-2. Replacing the Wiper Cleaner"

 

 

 

 

Nozzle Cleaning： "7-2-6. Cleaning the Print Head Nozzles"

 

 

 

 

Head Replacement： "7-2-7. Replacing the Print Head"

 

Maintenance

 

 

Auto Cleaning："7-2-5. Changing the Auto Head Cleaning Setting"

 

 

 

 

Initial Cleaning： Loads ink into the tube and Print Heads.

 

 

 

 

Tube Cleaning： 3-time Initial Cleaning to flush the whole tube and Print Heads. (CMYK)

 

 

 

 

CR Speed Adjust： Adjusts the increase/decrease of the Carriage speed.

 

 

 

 

Extra Wipe Set： "7-2-10. Setting Extra Wipe"

 

Total Print

 

Shows the number of prints on the left Platen.

 

Speaker Volume

 

Adjusts the speaker volume.

 

LCD Contrast

 

Adjusts the Display contrast.

 

Whole Update

 

Updates the firmware.

 

Auto Power-Off

 

 

Stops the controllers automatically and save the power after the set hour(s). Default is [0] (no

 

 

 

power off). Turn ON the printer for re-start.

 

 

 

 

 

Platen Reset

 

Restores the left Platen.

 

Language

 

Sets the language shown on the display.

 

Temperature

 

 

Sets Fahrenheit / Centigrade

 

Auto Job Delete

 

 

Delete the print data automatically after the print number which is set with Printer Driver is

 

 

 

finished. Default is OFF.

 

 

 

 

 

Version

 

Shows versions.

13

GT-782