Brother GT-782 DANGER, DANGER, WARNING, CAUTION, WARNING, SAFETY INSTRUCTIONS, Basic precautions, Symbols, Indications, [2] Notes on safety

Thank you very much for buying a BROTHER printer. Before using your new printer, please read the safety instructions below and the explanations given in the instruction manual.

SAFETY INSTRUCTIONS[1] Safety indications and their meanings

This instruction manual and the indications and symbols that are used on the printer itself are provided in order to ensure safe operation of this printer and to prevent accidents and injury to yourself or other people.

The meanings of these indications and symbols are given below.

Indications

DANGER	The instructions which follow this term indicate situations where failure to follow the instructions will
	result in death or serious injury.
WARNING	The instructions which follow this term indicate situations where failure to follow the instructions
	could result in death or severe injury.
CAUTION	The instructions which follow this term indicate situations where failure to follow the instructions
	could cause injury when using the machine or physical damage to equipment and surroundings.

Symbols

· · · · ·	This symbol (	) indicates something that you should be careful of. The picture inside the triangle indicates the
	nature of the caution that must be taken.

(For example, the symbol at left means “beware of injury”.)

· · · · ·

· · · · ·

This symbol ( ) indicates something that you must not do.

This symbol ( ) indicates something that you must do. The picture inside the circle indicates the nature of the thing that must be done.

(For example, the symbol at left means “you must make the ground connection”.)

[2] Notes on safety DANGER

Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the cover of the control unit. Do not touch as high voltage can result in severe injury.

WARNINGBasic precautions

Do not disassemble or modify the printer, otherwise it may cause fire or electric shocks or problems with correct operation.

Ask the place of purchase or a qualified technician to carry out any internal inspections, adjustments or repairs that may be required.

(Any problems with correct operation that occur as a result of the customer attempting to disassemble or modify the printer will not be covered by the warranty.)

Do not handle the power cord with wet hands, otherwise it may cause electric shocks.

GT-782 i