7. Troubleshooting
(10)Insert the Wiper Cleaner Cassette straight into your printer.
<Note>
Do not touch the Clearance Sensor (the bar above the Wiper Cleaner Cassette);
(11)Close the Front Cover, and then turn on your printer.
(12)Do the "Powerful" head cleaning and print the Nozzle Check Pattern until the print quality is satisfactory.
7-2-7. Replacing the Print Head
The print heads can be replaced following the "Replacing the print head procedure". Use only Print Head W for White Ink. If you have any questions please contact your service number.
<Note>
Replacement of the Black Print Head is shown as an example in this section. When the White Print Head is replaced, load the Maintenance Solution in advance. See
(1)Make sure your printer is in either "Standby" or "Ready" modes.
(2)Press the OK Button to display the Menu Display.
(3)Press the Up/Down Button to select “Maintenance”, and then press the OK Button.
(4)Press the Up/Down Button to select “Head Replacement”, and then press the OK Button.
(5)Press the Up/Down Button to select the color of Print Head to be replaced, and then press the OK Button. The following message appears. (e.g. Black)
(Continued on the next page)
90 |