WARNING

Installation

Do not set up the printer in a dusty environment. If dust

Do not bend the cords excessively or fasten them too hard

collects inside the printer, it may cause fire or electric

with staples or anything similar to secure cords, otherwise

shocks or problems with correct operation.

there is the danger that fire or electric shocks could occur.

Be sure to connect the ground. If the ground connection is

 

not secure, you run a high risk of receiving a serious electric

 

shock, and problems with correct operation may also occur.

 

 

 

Printing

 

If a foreign object gets inside the printer, immediately turn

Do not use the printer when smoke or a bad odor coming

off the power switch and disconnect the power cord, and

from the printer, otherwise it may cause fire or electric

arrange for a service call to resolve.

shocks or problems with correct operation.

If you continue to use the printer while there is a foreign

Immediately turn off the power switch and disconnect the

object inside, it may result in fire or electric shocks or

power cord, and arrange for a service call to resolve.

problems with correct operation.

 

Do not allow water or oil to get onto the printer, otherwise it

 

may cause fire or electric shocks or problems with correct

 

operation.

 

If any liquids get onto the printer, immediately turn off the

 

power switch and disconnect the power cord, and arrange

 

for a service call to resolve.

 

Maintenance

Do not put your hands in the ink cartridge slot, otherwise the needle inside the slot may cause injury.

CAUTIONEnvironmental requirements

Use the printer in an area which is free from sources of

The ambient temperature should be within the range of

strong electrical noise such as electrical line noise or

18°C to 30°C during use.

static electric noise.

Temperatures which are lower or higher than this may

Sources of strong electrical noise may cause problems

cause problems with correct operation.

with correct operation.

The relative humidity should be within the range of 20% to

Any fluctuations in the power supply voltage should be

85% during use, and no dew formation should occur in

within ±10% of the rated voltage for the printer.

any devices.

Voltage fluctuations which are greater than this may

Excessively dry or humid environments and dew formation

cause problems with correct operation.

may cause problems with correct operation.

The power supply capacity should be greater than the

Use the printer in a place which is adequately ventilated.

requirements for the printer’s power consumption.

A slight odor is generated when the printed articles are

Insufficient power supply capacity may cause problems

being fixed by heat.

with correct operation.

In the event of an electrical storm, turn off the power and

 

 

disconnect the power cord from the wall outlet.

 

Lightning may cause problems with correct operation.

ii

GT-782