CAUTION

Installation

Setting up and moving of the printer should only be carried

Do not set up the printer in a place where it will be affected

out by a qualified technician.

by vibration. It may become unbalanced and fall down,

The printer machine weighs approximately 230 kg (507

which cause injury or damage to the printer.

 

 

 

lb). Transporting and setting up of the printer should be

Do not connect the power cord until setup is complete,

held in proper way.

otherwise the printer may operate if the power switch is

The machine may fall down and cause injury.

turned on by mistake, which could result in injury.

The printer must be used on a suitable stable surface,

Do not climb onto the printer or place heavy objects on top

of it, otherwise it may become unbalanced and tip over or

otherwise it may tip over or fall down and cause injury.

fall down and cause injury.

Furthermore, the table that supports the printer should be

 

 

 

at least 180 cm (70.9 inch) in width and 90 cm (35.4 inch)

 

 

 

in depth, and should be able to bear a weight of 250 kg

 

 

 

(555 lb) or more.

 

 

 

 

 

 

 

Printing

 

 

 

This printer should only be used by operators who are

Do not move the Platen by hand.

appropriately trained in its operation.

The Printer may be mechanically and electrically

Ensure there is adequate space left for safe working. The

damaged.

 

 

 

Platen moves forward while operating and it may be

Do not put your hands inside the covers while the printer’s

injured.

power is turned on, otherwise your hands may touch

Do not handle the platen while printing. If your hand gets

against moving parts and this may result in injury.

 

 

 

caught between the platen or the T-shirt tray and the

When a problem occurs with the operation of the printer,

covers, it may be injured.

contact the place of purchase or a qualified technician.

 

 

 

Maintenance

Wait at least 1 minute after turning off the power switch

Take care not to let the ink, Wash Liquid, Maintenance

before opening the front cover.

Solution, Pretreatment or waste liquid

 

come into contact

 

Do not touch the head heat sink as it may be HOT and

with your eyes or onto your skin, otherwise inflammation

may cause a burn.

can result. In case of contact with eyes, do not rub but

Be careful not to get your fingers caught when closing the

immediately rinse the eyes with water.

Furthermore, do not drink the ink, Wash Liquid,

front cover, otherwise it may result in injury to your fingers.

Maintenance Solution, Pretreatment or waste liquid under

 

Do not move the Platen by hand.

any circumstances, as they can cause vomiting and

The Printer may be mechanically and electrically

diarrhea.

damaged.

Keep the ink, waste liquid and wash liquid out of the reach

 

of children.

Do not disassemble the ink cartridge.

Use only the proper replacement parts as specified by Brother.

GT-782

iii