Brother HL-3040CN, HL-3070CW manual 100

Control Panel

Network for HL-3070CW users (continued)

Submenu 1 Submenu 2		Menu Selections	Options	Descriptions
	WLAN	Status
	Status
		Signal
	(Appears only
		Channel
	when WLAN
		Speed			3
	Enable is
	On.)	SSID		Shows SSID [uses a maximum
				of 32 digits and characters 0-9,
				a-z and A-Z in ASCII values]
		Comm. Mode	Ad-hoc*/Infrastructure	Shows the current
				Communication Mode.
	Set to			Restores wired network settings
	Default			of the internal print server to the
				factory default.
	WLAN		Off*/On	Chooses Ethernet link mode.
	Enable

Factory Restores all network settings of the internal print server to the factory default.

Reset

The factory settings are shown in Bold with an asterisk.

1On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as 169.254.[001-254].[000-255]. If the 'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the machine's control panel.

Reset Menu

Display Shows Description

Reset Printer Resets the printer and restores all printer settings (including command settings) to settings you have previously made with the control panel buttons.

Factory Reset Resets the printer and restores the printer settings (including command settings) to the factory default settings.

The factory settings are shown in Bold with an asterisk.

Color Correction

Submenu	Menu Selections	Options	Descriptions
Color Calibration	Calibrate		Carry out calibration to revise the
			colours. (See Calibration
			on page 96.)
	Reset		Set the calibration parameters back
			to the default settings. (See
			Calibration on page 96.)

The factory settings are shown in Bold with an asterisk.

90