Control Panel

Network for HL-3040CN users

 

 

 

 

 

 

 

 

Submenu

Menu Selections

Options

Descriptions

 

 

 

 

 

TCP/IP

Boot Method

Auto*/Static/RARP/BOOTP

Choose the IP method that best suits

 

 

/DHCP

your needs.

 

 

 

 

 

 

IP Address

###.###.###.###

Enter the IP address.

 

 

(000.000.000.000)* 1

 

3

 

Subnet Mask

###.###.###.###

Enter the Subnet mask.

 

 

(000.000.000.000)* 1

 

 

 

Gateway

###.###.###.###

Enter the Gateway address.

 

 

(000.000.000.000)*

 

 

 

 

 

 

 

 

IP Boot Tries

##### (3*)

 

 

 

 

 

 

 

 

APIPA

On*/Off

Automatically allocates the IP

 

 

 

address from the link-local address

 

 

 

range. 1

 

IPv6

Off*/On

 

 

 

 

 

 

 

Ethernet

 

Auto*/100B-FD/100B-HD/

Chooses Ethernet link mode.

 

 

10B-FD/10B-HD

 

 

 

 

 

 

 

Factory Reset

Restores all network settings of the internal print server to the factory default.

 

 

 

 

 

The factory settings are shown in Bold with an asterisk.

1On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually enter an IP address from the machine's control panel.

88