Driver and Software

Print Quality

You can choose the following print quality settings.

￿ Normal

 

600⋅600 dpi. Recommended for ordinary printing. Good print quality with reasonable print speeds.

2

￿Fine

2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs. Since the print data is much larger than in normal mode, processing time / data transfer time and printing time will be longer.

Note

•The print speed will change depending on what print quality setting you choose. Higher print quality takes longer to print, while lower print quality takes less time to print.

•The HL-3040CN when printing in Fine mode may Out of Memory, if this should happen add more memory, see Installing extra memory on page 100.

Colour/Mono

You can change the Colour/Mono settings as follows:

￿Colour

When your document contains colour and you want to print it in colour, select this mode.

￿Mono

Select this mode if your document has only black and greyscale text and/or objects. If your document contains colour, selecting Mono mode prints your document in 256 levels of grey.

￿Auto

The printer checks the content of your documents for colour. If colour is detected, it prints in colour. If no colour content is detected, it prints in monochrome. The total printing speed may become slower.

Note

If the Cyan, Magenta or Yellow toner reaches the end of its life, choosing Mono will allow you to keep printing as long as the Black toner does not reach the end of its life.

37