Brother HL-3040CN, HL-3070CW PictBridge requirements, Setting your digital camera

Printing Methods

Printing photos from a digital camera (HL-3070CW only)

Your Brother printer supports the PictBridge standard, allowing you to connect to and print photos directly from any PictBridge compatible digital camera. Even if your camera is not in PictBridge mode or does not support PictBridge, you can connect your camera as a normal storage device. This enables you to print photos from your camera. Follow the steps for Printing data from a USB flash memory drive with direct print (HL-3070CW only) on page 27.

PictBridge requirements

The machine and the digital camera must be connected using a suitable USB cable.

The image file must be taken with the digital camera you want to connect to the printer.

Setting your digital camera

Make sure your camera is in PictBridge mode. The following PictBridge settings may be available from the LCD of your PictBridge compatible camera. Depending on your camera some of these setting may not be available.

Copies

Qualities

Paper Size

Date Print

File Name Print

Layout (1 in 1 printing / Index printing only)

You can also set the following PictBridge settings by using the control panel.

Menu	Submenu					Options	1
						Options

PictBridge	Paper Size		2			Letter / A4* / B5 / A5 / B6 / A6		See
	Paper Size							PictBridge(HL-3070

	Orientation					<For Letter,A4,B5> Portrait*/Landscape
	Orientation					<For Letter,A4,B5> Portrait*/Landscape		CW only) on page 92
								CW only) on page 92
						<For A5,B6,A6> Portrait/Landscape*

	Date & Time			2		Off* /On
	Date & Time

	File Name	2				Off* / On
	File Name

	Print Quality				2	Normal* / Fine
	Print Quality

1The default settings are shown in Bold with an asterisk.

2These menu selections are also set by your camera. Camera settings are prioritized as long as your camera is not set to use the Printer Settings (Default settings).