Brother HL-L8250CDN manual 103

General Information

Network for HL-L8250CDN

Submenu 1	Submenu 2	Menu Selections	Options	Descriptions
TCP/IP	Boot Method	-	Auto* / Static / RARP /	Chooses the IP method
			BOOTP / DHCP	that best suits your needs.
	IP Address	-	###.###.###.###	Enter the IP address.
			(000.000.000.000)* 1		3
	Subnet Mask	-	###.###.###.###	Enter the Subnet mask.
			(000.000.000.000)* 1
	Gateway	-	###.###.###.###	Enter the Gateway
			(000.000.000.000)* 1	address.
	IP Boot Tries	-	0 / 1 / 2 / 3* / ... / 32767	Specifies the number of
				attempts the machine will
				try to obtain an IP address
				when the Boot Method is
				set to any setting except
				Static.
	APIPA	-	On* / Off	Automatically allocates
				the IP address from the
				link-local address range. 1
	IPv6	-	On / Off*	Enables or disables the
				IPv6 protocol.
Ethernet	-	-	Auto* / 100B-FD /	Chooses Ethernet link
			100B-HD /10B-FD /	mode.
			10B-HD
Wired Status	-	-	Active 100B-FD /	Displays Ethernet link
			Active 100B-HD /	status.
			Active 10B-FD /
			Active 10B-HD /
			Inactive / Wired OFF
MAC Address	-	-	-	Displays MAC address of
				the machine.
Security	IPsec	-	On / Off*	IPsec is an optional security
				feature of the IP protocol
				that provides authentication
				and encryption services.
				We recommend contacting
				your network administrator
				before changing this
				setting.
Network Reset	Restores all network settings of the internal print server to the factory settings.

The factory settings are shown in Bold with an asterisk.

1### means a number within the range of 000 to 255. On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.

96