Options

e Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it locks into place (2).

12

4

f Put the metal (2) and then the plastic (1) SO-DIMM covers back on.

2

1

g h

Plug the machine’s power cord back into the AC power outlet first, and then connect the interface cables.

Turn on the machine’s power switch.

NOTE

To make sure that you have installed the SO-DIMM properly, you can print the Printer Settings page that shows the current memory size. (See Machine Info. on page 89.)

117