Option

d Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).

12

4

e Put the metal (2) and then the plastic (1) SO-DIMM covers back on.

2

1

f Reconnect the interface cable to your printer. Plug the printer back in, and then turn on the power switch.

Note

To make sure that you have installed the SO-DIMM properly, you can print the printer settings page that shows the current memory size. (See Machine Info. on page 82.)

100