g When the printer has finished cleaning, Completed appears on the LCD. Press Cancel so that the printer returns to the Ready state.
h Repeat steps c to g two more times using a new blank sheet of paper each time. Upon completion please discard the used paper. If the print problem is not resolved please contact Brother Customer Service.
Routine Maintenance
Note
•Make sure that the paper is straight and in the correct position on the manual feed slot. If it is not, the paper may not be fed properly, resulting in a skewed printout or a paper jam.
•Do not put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam.
•If you put paper in the manual feed slot before the printer is in the Ready state, an error may occur and the printer will stop printing.
d Make sure that the printer is in the Ready state. Press + or - to choose Color Correction. Press OK.
Select ab or OK
h
5
Color Correction
e Press + or - to choose Drum Cleaning.
Drum Cleaning
f Press Go. The printer will pull in the piece of paper and start cleaning the drum unit.
Please Wait
134