Brother HL3045CN, HL3075CW Quiet zone, Bar code & expanded character offset in Y-axis, Bar code, expanded character unit, line block drawing and box drawing

Appendix

Preset:	Human readable line ON
	(1)	‘T5’ or ‘t5’
	(2)	‘T6’ or ‘t6’
	(3)	‘T130’ or ‘t130’
	(4)	‘T131’ or ‘t131’
Preset:	Human readable line OFF
	All others

This parameter shows whether the printer prints the human readable line below the bar code. Human readable characters are always printed with OCR-B font of 10 pitch and all the current character style enhancements are masked. The default setting is determined by the bar code mode selected by ‘t’ or ‘T’.

Quiet zone

n = ‘onnn’ or ‘Onnn’ (nnn = 0 ~ 32767)

Quiet zone is the space on both sides of the bar codes. Its width can be shown using the units that are set by A the ‘u’ or ‘U’ parameter. (For the description of ‘u' or ‘U' parameter, see the next section.) The default setting

of the quiet-zone width is 1 inch.

Bar code, expanded character unit, line block drawing and box drawing

n = ‘u0’ or ‘U0’	mm (preset)
n = ‘u1’ or ‘U1’	1/10
n = ‘u2’ or ‘U2’	1/100
n = ‘u3’ or ‘U3’	1/12
n = ‘u4’ or ‘U4’	1/120
n = ‘u5’ or ‘U5’	1/10 mm
n = ‘u6’ or ‘U6’	1/300
n = ‘u7’ or ‘U7’	1/720

This parameter shows the measurement units of X-axis offset, Y-axis offset, and bar code height.

Bar code, expanded character, line block drawing and box drawing offset in X-axis

n = ‘xnnn’ or ‘Xnnn’

This parameter shows the offset from the left margin in the ‘u’- or ‘U’-specified unit.

Bar code & expanded character offset in Y-axis

n = ‘ynnn’ or ‘Ynnn’

This parameter shows the downward offset from the current print position in the ‘u’- or ‘U’-specified unit.

177