Control Panel
Network for
Submenu 1 Submenu 2 | Menu Selections | Options | Descriptions |
| |
| WLAN | Status |
|
|
|
| Status | Signal |
|
|
|
| (Appears only | Channel |
|
|
|
| when WLAN |
|
|
|
|
Speed |
|
| 3 | ||
| Enable is |
| |||
| On.) | SSID |
| Shows SSID [uses a maximum | |
|
|
|
| of 32 digits and characters | |
|
|
|
| ||
|
|
|
|
|
|
|
| Comm. Mode | Shows the current | ||
|
|
|
| Communication Mode. |
|
| Set to |
|
| Restores wired network settings | |
| Default |
|
| of the internal print server to the | |
|
|
|
| factory default. |
|
| WLAN |
| Off*/On | Chooses Ethernet link mode. | |
| Enable |
|
|
|
|
Factory Restores all network settings of the internal print server to the factory default.
Reset
The factory settings are shown in Bold with an asterisk.
1On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as
Reset Menu
Display Shows | Description |
Reset Printer | Resets the printer and restores all printer settings (including command settings) to settings |
| you have previously made with the control panel buttons. |
Factory Reset | Resets the printer and restores the printer settings (including command settings) to the |
| factory default settings. |
The factory settings are shown in Bold with an asterisk.
Color Correction
Submenu | Menu Selections | Options | Descriptions |
Frequency | Normal*/Low/Off |
| Sets the interval time you want to |
|
|
| carry out the auto color correction |
Color Calibration | Calibrate |
| Carry out calibration to revise the |
|
|
| colors. (See Calibration on page 95.) |
| Reset |
| Set the calibration parameters back |
|
|
| to the default settings. (See |
|
|
| Calibration on page 95.) |
The factory settings are shown in Bold with an asterisk.
89