Setting Up the Scanner Configurations

The Pop-Up application stores eight different scanning modes. Each time you scan an original, you will choose the most appropriate scanning mode from the following:

Faxing, Filing and CopyingText for OCRPhotosPhotos (High Quality)Photos (Quick Scan)CustomDraft CopyFine Copy

Each mode has its own set of stored settings. You can keep the factory default settings or change them at any time:

Resolution—Select the scanning resolution you most frequently use. Color Mode—From the pull-down list, select

Scan Size—From the pull-down list, select Brightness—Slide the adjuster from 0% to 100% Contrast—Slide the adjuster from 0% to 100%

Click OK to save your changes. If you make a mistake or later decide to return to the original default setting, just click the Restore Defaults button when the scanning mode is displayed.

To Access the Scanner Configuration Screen:1Place the original in the ADF.

2Right-click the appropriate Control Center button to display Configurations…, then click it. The configuration screen for that Control Center button will appear.

3To save your settings, press the OK button—OR—To return to the factory default settings, press the Restore Defaults button.

Perform an Operation from the Control Center Screen

If you see this screen it means you left-clicked a button in the Control Center window without first placing an original in the ADF.

Place the original in the Brother machine’s ADF, and then click OK to return to the Control Center screen.

U S I N G T H E W I N D O W S ®- B A S E D B R O T H E R M F L - P R O C O N T R O L C E N T E R

15 - 6