Note

•If an error message is displayed, press Mono Start or Colour Start and try again. (For more information, see Error and maintenance messages on page 113.)

•If you print using the Windows® printer driver, the driver will get the calibration data automatically if both Use Calibration Data and Get Device Data Automatically are on. The default settings are on. (See Advanced tab in the Software User's Guide.)

•If you print using the Macintosh printer driver, you need to perform the calibration using the Status Monitor. After turning the Status Monitor on, choose Color Calibration from the Control menu. (See Status Monitor in the Software User's Guide. When the Status Monitor is open, choose Control / Color Calibration from the menu bar.)

Routine maintenance

Auto Registration

Registration

If solid areas of colour or images have cyan, magenta or yellow fringes, you can use the auto-registration feature to correct the problem.

a Press Menu, 4, 7.

b To start, press 1. To exit, press 2.

c Press Stop/Exit.

Manual Registration

If colour still appears incorrectly after auto- registration, you will need to perform manual registration.

a Press Menu, 4, 8, 1.

b Press Mono Start or Colour Start to start printing the colour registration chart.

c When the machine has finished printing the registration chart, press 2

(Set Regist.) to correct the colour manually.

d Starting at 1 (1 Magenta Left) on the

A

chart, check which coloured bar has the

most uniform print density and enter its

 

number into the machine using the a

 

and b keys.

 

Press OK.

 

Repeat for 2 (2 Cyan Left), 3

 

(3 Yellow Left), 4, 5, 6 to 9.

 

e Press Stop/Exit.

 

111