Brother NX 200 manual Contact your retailer or the nearest Burr on it, High-pitched, Be used

APPENDIX —————————————————————————————————————————————————————

Symptom	Probable Cause	Remedy	Reference
	The upper thread was not threaded	Correctly thread the upper thread
The fabric is	correctly, or the bobbin is incor-	and correctly install the bobbin	page 16, 18	CONTENTS
	and needle is not correct.	appropriate for the type of fabric	page 26
	rectly installed.	thread.
	The spool is incorrectly installed.	Correctly install the spool.	page 18
	The combination of fabric, thread	Select a thread and needle that are
wrinkled.		being sewn.
	The needle is bent or blunt.	Replace the needle.	page 27
	If thin fabrics are being sewn, the	Shorten the stitch length or sew with	page 46	GETTING
	stitch is too coarse.	stabilizer material under the fabric
	The thread tension is incorrect.	Adjust the tension of the upper	page 44
		thread.
	The upper thread was not threaded	Correct the upper threading.	page 18	READY
	correctly.
	The combination of fabric, thread	Select a thread and needle that are
		appropriate for the type of fabric	page 26
	and needle is not correct.
Stitches are		being sewn.
skipped.				SEWING
	The needle is bent or blunt.	Replace the needle.	page 27
	The needle is incorrectly installed.	Correctly install the needle.	page 28
	Dust has accumulated under the	Remove the needle plate cover and	page 96	BASICS
	needle plate or in the shuttle.	clean the shuttle.
	Dust has accumulated in the feed	Clean the shuttle.	page 96
	dogs or in the shuttle.
	The upper thread was not threaded	Correct the upper threading.	page 18
	correctly.			UTILITY
while sewing.		Contact your retailer or the nearest	–
	burr on it.
A high-pitched
noise is made	The shuttle is scratched, or has a	Replace the shuttle.
		authorized service center.		STITCHES
	A bobbin designed specifically for	Incorrect bobbins will not work prop-
		erly. Only use a bobbin designed spe-	page 12
	this machine is not used.
		cifically for this machine.
The needle	The needle was not raised.	Press the needle position button to	page 21
		raise the needle.
threader cannot
be used.	The needle is incorrectly installed.	Correctly install the needle.	page 28	APPENDIX
	The presser foot that is used is not	Attach the presser foot that is appro-
	appropriate for the type of stitch that	priate for the type of stitch that you	page 92
	you wish to sew.	wish to sew.
The stitch is not	The thread tension is incorrect.	Adjust the tension of the upper	page 44
sewn correctly.		thread.
	The thread is tangled, for example,	Remove the tangle thread. If the
		thread is tangled in the shuttle, clean	page 96
	in the shuttle.
		the shuttle.
				INDEX

100