Brother NX 200 4Insert the extra spool pin onto the bobbin winder shaft, Attach zigzag foot J

4Insert the extra spool pin onto the bobbin winder shaft.

Insert the extra spool pin so that it is perpendicular to the bobbin winder shaft.

1

1Bobbin winder shaft

5Swinghorizontal.down the spool pin so that it is

6Place the upper thread spool for the needle on the right side onto the extra spool pin, and then secure it with the spool cap.

The thread should unroll from the top front of the spool.

1 2

1Spool cap

2 Spool

7Thread the upper thread in the same way that the upper thread for the left side was threaded.

1

1Thread guide cover

•For details, refer to step 8 through 0 of “Threading the upper thread” (page 20).

8Without passing the thread through the needle bar thread hook, manually thread the right needle.

Pass the thread through the eye of the needle from the front.

•The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the sewing machine may be damaged.

9Attach zigzag foot “J”.

•For details on changing the presser foot, refer to “Replacing the presser foot” (page 29).

CAUTION

●When using the twin needle, be sure to attach zigzag foot “J”, otherwise the needle may break or the machine may be damaged.

0Turn on the sewing machine.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Upper Threading 23