Brother NX 200 manual If the needle catches too much of the hem fold

UTILITY STITCHES ——————————————————————————————————————————————————

6Adjust the stitch width until the needle slightly catches the fold of the hem.

R

1

1

2 3

2

3

1Needle drop point

2 Wider stitch

3 Narrower stitch

■If the needle catches too much of the hem fold

If the needle catches too much of the hem fold, move the stitch width adjustment lever down. This makes the stitch narrower to move the needle away from the fold.

1 2

1Wrong side of fabric

2Right side of fabric

■If the needle does not catch the hem fold If the needle does not catch enough of the hem fold, move the stitch width adjustment lever up. This makes the stitch wider to move the needle closer onto the fold.

1 2

1Wrong side of fabric

2 Right side of fabric

•For details on changing the stitch width, refer to “Adjusting the Stitch Width and Length” (page 45).

7Sew with the fold of the hem against the presser foot guide.

8Remove the basting stitching.

1 2

1Wrong side of fabric

2 Right side of fabric

Memo

●For best results when sewing stretch fabrics, decrease the pressure of the presser foot. For details, refer to “Adjusting the pressure of the presser foot” (page 30).

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

62