Enclosed Accessories, Part code XA4813-051 | Brother NX 200 specification

Enclosed Accessories

After opening the box, check that the following accessories are enclosed. If any item is missing or damaged, contact your retailer.

Accessories

The following items should also be enclosed in the box.

					Note
					(For U.S.A. only)
					● Foot controller: Model N5V
					This foot controller can be used on this
					machine model NX-200.
					● The screw of the presser foot holder is
					available through your authorized dealer.
					(Part code: XA4813-051)
					● The organized accessory tray is available
					through your authorized dealer.
					(Part code: XC4489-051)
1.	2.	3.	4.	5.	6.	7.	8.	9.

10.*	11.	12.	13.	14.	15.	16.	17.	18.
19.	20.	21.	22.	23.		24.

*75/11 2 needles 90/14 2 needles

90/14 2 needles: Ball point needle (gold colored)

	No.	Part Name	Part Code		No.	Part Name	Part Code
			U.S.A.	Others			U.S.A.	Others

	1	Buttonhole foot “A”	XC2691-051		13	Eyelet punch	135793-001
	2	Overcasting foot “G”	XC3098-051		14	Screwdriver (large)	X55467-051
	3	Monogramming foot “N”	X53840-351		15	Screwdriver (small)	X55468-051
	4	Zipper foot “I”	X59370-051		16	Spool cap (large)	130012-054
	5	Zigzag foot “J” (on machine)	XC3021-051		17	Spool cap (medium)(2)	X55260-153
	6	Blind stitch foot “R”	X56409-051		18	Spool cap (small)	130013-154
	7	Button fitting foot “M”	130489-001		19	Extra spool pin (horizontal)	XC4654-051
	8	Seam ripper	X54243-001		20	Spool net	XA5523-050
	9	Bobbin (4)	SA156	XA5539-151	21	Foot controller	XC1154-051
	10	Needle set	X58358-051		22	Operation manual	XC4665-051
	11	Twin needle	X59296-051		23	Quick reference guide	XC4546-051
	12	Cleaning brush	X59476-051		24	Hard case	XC2360-152

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Cover A

Image 2

Brother NX 200 manual Enclosed Accessories, Following items should also be enclosed in the box, Part code XA4813-051

Contents

Page Following items should also be enclosed in the box Enclosed AccessoriesAccessories Part code XA4813-051 Names of Machine Parts and Their Functions Front view Needle and presser foot section Right-side/rear view Contents Getting Ready Operation buttons Operation panel Automatic reverse/reinforcement stitch key Optional Accessories Following are available as optional accessories Sewing Machine Features Introduction Contents Utility Stitches Troubleshooting Stitch SettingsMaintenance Index Important Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only Congratulations on Choosing OUR Machine Getting Ready Power supply precautions Turning the Machine On/Off Turning on the machine 3Unplug the power supply cord from the electrical outlet4Unplug the power supply cord from the power supply jack Turning off the machine Winding the bobbin Winding/Installing the BobbinBobbin precautions 4Slide the bobbin winder shaft to the right Place the spool of thread for the bobbin onto the spool pin Pass the thread under the thread guide plate from the right Thread is cut to a suitable length Sewing machine stops DPress start/stop button onceEPress start/stop button once Installing the bobbin Slide the bobbin cover latch to the right 7Reattach the bobbin cover 1Turn on the sewing machine 2Raise the presser foot lever Upper ThreadingThreading the upper thread Presser foot is raised 4Lift open the upper cover Place the spool for the upper thread onto the spool pin Shutter Presser foot is lowered Threading the needle3Lower the presser foot lever 4Lower the needle threader lever until it clicks Manually thread the left needle with the upper thread Using the twin needleThreadeye. the upper thread for the left needle Attach zigzag foot J 4Insert the extra spool pin onto the bobbin winder shaftThread should unroll from the top front of the spool 0Turn on the sewing machine Two lines of stitching are sewn parallel to each other Using thread that winds off quicklyASelect a stitch 1Insert the bobbin into the shuttle Refer to steps 1 through 5 of Installing the bobbinPulling up the bobbin thread Needle types and their uses Needle precautionsReplacing the Needle Fabrics Incorrect needle Checking the needleCorrect needle Replacing the needle Replacing the presser foot Presser foot precautionsReplacing the Presser Foot Presser foot is attached Adjusting the pressure of the presser foot3When you are finished sewing, reset the dial to 3 standard Lower the presser foot lever Removing the presser foot holder 1Remove the presser foot Using the optional walking footRemoving the presser foot holder For details, refer to Replacing the presser foot 2Turn off the sewing machine 3Raise the presser foot lever For details, refer to Removing the presser foot holder Sewing large pieces of fabric Sewing Cylindrical or Large PiecesStitching cylindrical pieces Memo Sewing Basics Sewing General sewing procedure 3Place the fabric under the presser foot Positioning the fabricTurn on the sewing machine Fabric is now positioned to be sewn Starting to sew Machine stops sewing with the needle lowered in the fabric Machine stops sewing Securing the stitchingFor details, refer to Starting to sew Machine starts sewing Machine starts sewing in the normal sewing direction Release the start/stop button or foot controller Sewing reinforcement stitches When you have finished sewing, cut the threads Cutting the thread Correct thread tension Adjusting the Thread TensionChanging the tension of the upper thread Upper thread is too tight Stitch width can be adjusted with the arrow keys Adjusting the Stitch Width and LengthAdjusting the stitch width Stitch width adjustment button lights up Stitch length adjustment button lights up Adjusting the stitch lengthStitch length can be adjusted with the arrow keys Slideand down.the stitch length adjustment slider up For the lowered needle stop position Useful FunctionsChanging the needle stop position For the raised needle stop position Start/stop button Changing the sewing direction Useful Sewing TipsTrial sewing Sewing curves Sewing thick fabrics Sewing an even seam allowance Sewing thin fabricsSewing stretch fabrics Aligning the fabric with the presser foot Sewing Basics Utility Stitches Attach the presser foot Selecting StitchingSelecting stitching Selecting Stitching Stitch Sewing overcasting stitches using overcasting foot GOvercasting Stitches Attach overcasting foot G Sewing overcasting stitches using zigzag foot J Sewing overcasting stitches using the optional side cutter Contents Getting Ready Sewing Lower the presser foot lever, and then start Position the fabric in the side cutterAsewing Basic stitching When sewing is finished, cut the threadBasic Stitching Position 5hem against the guide of the presser foot, Blind Hem StitchingFoot Then lower the presser foot lever If the needle catches too much of the hem fold Buttonhole Stitching Buttonhole sewing 3Attach buttonhole foot a If the button does not fit in the button guide plateSize of the buttonhole is set 4Select a stitch For details, refer to Adjusting the stitch width Changing the stitch width Trim off any excess of the gimp thread Button sewingSewing buttonholes on stretch fabrics Feed dogs are lowered 9Start Aftersewing.sewing for about 10 seconds at low 4Place the button into button-sewing foot MSelect stitch Attaching a shank to a button 3Cut off any excess thread Zipper can be sewn in place Zipper InsertionInserting a centered zipper Are described below 7Topstitch around the zipper Inserting a side zipper6Select stitch 7Select stitch Wrong side of fabric Mm 1/8 inch BTopstitch around the zipper Sewing Stretch Fabrics and Elastic Tape Stretch stitching Elastic attaching 3Select stitch Straight Appliqué, Patchwork and Quilt StitchingPiecing Quilting 4Attach zigzag foot J Appliqué stitchingRemove the thick paper after pressing the seam allowance Piecing Edge of the fabric, and sew using stitchPatchwork crazy quilt stitching 3Select stitch or Baste the fabric to be quilted Attach the walking foot For details, refer to Using the optional walking footQuilting Walking foot Presser foot holder Using the optional quilting guideFree-motion quilting 1Removeholder. the presser foot and the presser foot 4Slide the drop feed lever, located at the rear Normally, the drop feed lever is positioned at the left Bar tack stitching Reinforcement StitchingTriple stretch stitching 2Select stitch 5Pullpossible.down the buttonhole lever as far as Attach monogramming foot N 3Adjust the stitch width to select the desired eyelet sizeEyelet Stitching Decorative Stitching Decorative 4Select stitch or Fagoting3Attach zigzag foot J Set the stitch width to 7.0 mm 1/4 inch 4Trim along the stitches Scallop stitchingSmocking 3Sew parallel stitching at intervals of 1 cm 3/8 inch 3Select stitch , or Joining5Select stitch or 2Attach monogramming foot N 1Install the wing needleHeirloom stitching 4Start sewing 4Sew along the center of the unfrayed section Stitch Settings Maintenance Troubleshooting Index Appendix Stitch Settings Utility stitches Stitch Settings Stitch Width Stitch Length Mm inch Sewing Cleaning the shuttle MaintenanceCleaning the machine surface Needle plate cover is removed Do not apply oil to the shuttle Remove the shuttleGrasp the shuttle, and then pull it out Not operate TroubleshootingPresser foot lever is raised Lower the presser foot lever Loosen the upper thread tension Shuttle Clean the shuttleCorrectly install the presser foot Replace the bobbin High-pitched Thread tension is incorrect Adjust the tension of the upperContact your retailer or the nearest Burr on it This machine is not used Cifically for this machine Pressure of the presser foot is Error messagesYou wish to sew Wish to sew Sewing lamp is damaged Contact your retailer or the nearest Hold the upper cover level Operation beepRemoving the upper cover Index Numerics 104 English 882-S60 XC4665-0511