Brother NX 200 Release the start/stop button or foot controller, Sewing reinforcement stitches

SEWING BASICS ———————————————————————————————————————————————————

7After 3 to 5 reverse stitches have been sewn,

release (reverse/reinforcement stitch button).

XThe machine stops sewing.

8Press (start/stop button), or press down on the foot controller.

At this time, if the start/stop button is held pressed, the machine sews at a low speed.

XThe machine starts sewing in the normal sewing direction.

9After sewing to the end of the stitching, the sewing machine stops.

Release the start/stop button or foot controller.

	1
3	1
	2

5

4

6

2

1Beginning of stitching

2 End of stitching

■Sewing reinforcement stitches

When sewing stitches other than straight or zigzag stitches that are secured with reverse stitching,

pressing (reverse/reinforcement stitch button) sews reinforcement stitches, 3 to 5 stitches on top of each other.

12

1Reverse stitching

2Reinforcement stitching

Memo

●Whether reverse stitches or reinforcement stitches are sewn depends on the stitch that is selected. For details, refer to “Stitch Settings” (page 92).

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

42