Brother NX 200 manual Operation panel, Automatic reverse/reinforcement stitch key

Operation panel

The operation panel, located on the front at the right of the sewing machine, consists of various buttons and sliders for specifying how the stitch will be sewn.

12

	3
8	4
	5
7	6

1Stitch width adjustment slider / 2 Stitch width adjustment button

These are used to adjust the width of the stitch or the needle position. After pressing the stitch width adjustment button, use the stitch width adjustment slider to adjust the stitch width.

3Stitch length adjustment slider / 4 Stitch length adjustment button

These are used to adjust the length of the stitch. After pressing the stitch length adjustment button, use the stitch length adjustment slider to adjust the stitch length.

5Automatic reverse/reinforcement stitch key

Press the automatic reverse/reinforcement stitch key to automatically sew reverse or reinforcement stitches at the beginning and end of stitching.

6Needle stop position key

This is used to change the position of the needle when the sewing machine is stopped. If the key is lit, the sewing machine will stop with the needle lowered. If the key is not lit, the sewing machine will stop with the needle raised.

7Stitch selection key / 8Stitch indicator

Press the stitch selection key, and then select the number for the stitch that you wish to use. 50 stitches are available. For details, refer to “Selecting Stitching” (page 54).

9Stitches

There are 50 stitches. Select stitch 00-49.

A letter (A, G, J, N or R) indicating the presser foot that should be used appears to the right of the stitch number.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Cover E