Brother NX 200 manual BTopstitch around the zipper

0Close the zipper, turn over the fabric, and then baste the other side of the zipper to the fabric.

1

1Basting stitching

aAttach the presser foot holder to the other pin of zipper foot “I”.

If the presser foot holder was attached to the right pin in step 6, change it to the left pin.

1

I

2

1Pin on the left side

2 Needle drop point

bTopstitch around the zipper.

Sew reverse stitches at the end of the zipper opening and align the zipper teeth with the side of the presser foot.

3

cWhen you are about 5 cm (2 inch) from the end of the zipper, stop the sewing machine with the needle lowered (in the fabric), and then raise the presser foot lever.

dRemove the basting stitching, open the zipper, and then continue sewing.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES

2

1

4

5

APPENDIX

1Right side of fabric

2 End of zipper opening

3 Reverse stitches

4 Beginning of stitching

5 Basting stitching

INDEX

Zipper Insertion 73