Brother NX 200 manual 4Slide the drop feed lever, located at the rear

4Slide the drop feed lever, located at the rear

of the machine on the base, to (to the right as seen from the front of the machine).

1

2

1Feed dog position switch

(as seen from the rear of the machine)

2Back side

XThe feed dogs are lowered.

5Turnstitch.on the sewing machine, and then select a

•For details, refer to “Selecting stitching” (page 54).

6Use both hands to stretch the fabric taut, and then move the fabric to follow the pattern. Reinforcement stitches are sewn at the beginning and end of sewing.

1

1Pattern

7After sewing is finished, slide the drop feed

lever to (to the left as seen from the front of the machine) to raise the feed dogs.

1

1Back side

•Normally, the drop feed lever is positioned at the left.

Note

●The optional quilting foot is available through your brother retailer.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Appliqué, Patchwork and Quilt Stitching 81