Bryant 580F Xiv. - Install Humidistat For Optional, Perfect Humidity Dehumidification Package

XIV. STEP 14 — INSTALL HUMIDISTAT FOR OPTIONAL

PERFECT HUMIDITY™ DEHUMIDIFICATION PACKAGE

Perfect Humidity dehumidification package operation can be controlled by field installation of a Bryant-approved humidistat. To install the humidistat perform the following procedure:

1.Locate humidistat on a solid interior wall in the conditioned space. Location should be in a well venti- lated area to sense average humidity.

2.Route thermostat cable or equivalent single leads of colored wire from humidistat terminals through con- duit in unit to the low voltage connection on the 2-pole terminal strip (TB3) as shown in Fig. 34 and Fig. 35. See Fig. 36 for operation diagram.

Fig. 35 — Typical Perfect Humidity

Dehumidification Package Control Box

		LEGEND
CB	—	Circuit Breaker
LLSV	—	Liquid Line Solenoid Valve
LPS	—	Low-Pressure Switch
TB	—	Terminal Block
TRAN —		Transformer

Fig. 34 — Typical Wiring Perfect Humidity Dehumidification Package Humidistat (460 V Unit Shown)

—24—