8.Use ®eld-supplied wire ties to attach the violet wire to the + terminal and the blue wire to the SR terminal.

9.Replace economizer ®lters.

10.Return power to unit.

Disable Economizer

For applications where the economizer will not be used (areas of high humidity), the economizer should be disabled. To disable the economizer, perform the following:

1.Turn off power. Lock out disconnect.

2.Locate the OAT (outdoor air thermistor) in the right hand outdoor air damper area.

3.Locate the splice connecting the violet wire coming from T24 on the base module board to the red wire coming from T29 on the base module board. Remove the wire nut and break the red to violet wire splice.

4.Cap off both wires. When the connection is broken, the base module is fooled into thinking that the enthalpy is not acceptable and economizer operation is disabled.

NOTE: Economizer operation can also be disabled by discon- necting the OAT. This is not recommended due to the fact that Unoccupied Free Cooling, IAQ Purge, and Low Ambient Fan Cycle Control are also disabled. An OAT failure alarm will also be issued.

X. POWER EXHAUST/BAROMETRIC RELIEF DAMPER HOOD

All electrical connections have been made and adjusted at the factory. The power exhaust blowers and barometric relief damp- ers are shipped assembled and tilted back into the unit for shipping. Brackets and extra screws are shipped in shrink wrap around the dampers. If ordered, each unit will have 4 power exhaust blowers and motors or 4 barometric relief dampers.

1.Remove 9 screws holding each damper assembly in place. See Fig. 30. Each damper assembly is secured with 3 screws on each side and 3 screws along the bottom. Save screws.

2.Pivot each damper assembly outward until edges of damper assembly rest against inside wall of unit.

CAUTION: Be careful when tilting blower assembly. Hoods and blowers are heavy and can cause injury if dropped.

3.Secure each damper assembly to unit with 6 screws across top (3 screws provided) and bottom (3 screws from Step 1) of damper.

4.With screws saved from Step 1, install brackets on each side of damper assembly.

5.Remove tape from damper blades.

NOTE: Partitions shown indicate both side supply (580H) and vertical supply (580G) units.

Fig. 29 Ð Economizer Details

Ð18Ð

Page 18
Image 18
Bryant 580G manual Power EXHAUST/BAROMETRIC Relief Damper Hood, Economizer Details

580G specifications

The Bryant 580G is a high-efficiency gas furnace designed to deliver optimal heating performance while maximizing energy savings. This model stands out in the Bryant product lineup due to its advanced features and robust technology, making it a popular choice for homeowners seeking reliable comfort in colder climates.

One of the key characteristics of the Bryant 580G is its efficiency rating. With an annual fuel utilization efficiency (AFUE) of up to 92.1%, this furnace ensures that a substantial portion of the fuel consumed is converted into heat, minimizing energy waste and reducing utility bills. This high-efficiency performance is particularly beneficial for those looking to lower their environmental footprint and operate a more sustainable home heating system.

The 580G uses a two-stage heating process, which allows it to operate at two levels of output. During mild weather, the furnace can run on a lower setting, providing gentle warmth while conserving energy. When temperatures drop, the system automatically ramps up to a higher output to maintain comfort. This feature not only enhances energy efficiency but also helps to eliminate temperature fluctuations, ensuring consistent warmth throughout the home.

Noise reduction technology is another remarkable aspect of the Bryant 580G. Equipped with a variable speed blower motor, this furnace operates quietly, providing a more peaceful indoor environment. The motor allows for customizable airflow, which further aids in maintaining an even temperature across different rooms and spaces.

The furnace is built with high-quality materials and features a compact design, making it a suitable option for various installation locations. Additionally, it is compatible with Bryant’s EcoNet Smart Home Management System, which enables homeowners to monitor and control their heating system remotely via a smartphone app. This integration enhances convenience and allows for timely adjustments to heating schedules, promoting energy savings.

Safety is a priority with the 580G. It features an integrated safety switch and a reliable flame sensor to ensure safe operation. With its durable construction and thoughtful engineering, the Bryant 580G is designed to withstand the demands of everyday use while providing peace of mind to homeowners.

In summary, the Bryant 580G gas furnace combines high efficiency, advanced technology, and user-friendly features. Its ability to operate quietly, adapt to temperature changes, and integrate with smart home technology makes it a leading choice for efficient home heating solutions. This furnace not only provides comfort but also offers long-term energy savings, making it a smart investment for any household.