Ending an intercom call

Press the INTERCOM button on the handset or base unit. Both INTERCOM lights on the handset and base unit go out.

To call the handset from the base unit

At the base unit:

INTERCOM

Press the INTERCOM button on the base unit. The base unit INTERCOM light flashes and both the handset and base unit ring.

If the handset does not reply to an intercom call, press the INTERCOM button again to clear the call. You cannot make an intercom call if the handset is busy.

At the handset:

INTERCOM

Press the INTERCOM button and speak. The INTERCOM light stops flashing but stays on.

Using your Freestyle 1200 telephone

Ending an intercom call:

Press the INTERCOM button on the handset or base unit. Both INTERCOM lights on the handset and base unit go out.

You cannot use the intercom while a call is in progress. The intercom will beep for 60 seconds and then automatically cut off if not answered.

To adjust the INTERCOM loudspeaker volume at the base unit

VOLUME

Press the left-hand side of the VOLUME switch to lower the volume.

Press the right-hand side of the VOLUME switch to raise the volume.

If there is an incoming call when using the intercom, the base unit and handset will ring. To take the call, press the TALK button on the handset. The intercom call is cut off automatically.

15

Page 17
Image 17
BT 1200 manual Ending an intercom call