BT 1200 Wall mounting

49

•Drill two holes for the screws and

insert the wall plugs provided (if

required).

•Drive the screws into the wall,

leaving about 5mm free on which

to mount the phone.

•Make sure that the power supply

and the telephone cables are

connected to the base unit, then

fit the cables into the channels on

the bottom of the base unit.

•Clip the bracket onto the base

unit as shown on the next page.

•Hook the bottom hole of the

bracket and the top hole on the

back of the base unit over the

screw heads.

Your Freestyle 1200 can be wall-

mounted by using the bracket

provided.

Use the template on page 51 to

mark where the screws should go

into the wall.

Wall mounting

Spare parts for your Freestyle 1200

are available from your BT shop or

supplier, or you can contact us on

Lo-call 0845 7697146between 9.00am

and 5.30pm Monday to Friday.

WALL 10cm

Before you wall-mount your Freestyle

1200, check that:

•the wall can support the weight of

the base unit and handset;

•the position you choose leaves

sufficient space so that the base unit

(which is larger than the bracket) is

clear of any obstruction on the wall,

such as a shelf or cupboard. Room

should be left so that the handset can

be placed on charge without

touching any obstructions.

•leave enough r oom for the aerial to

be fully extended when wall mounted.

Attach the bracket by

hooking it over the screws

protruding from the wall.

Contents

Main Page At a glance Freestyle 1200 In this guide I ntr oducti on been designed for ease of use and made to the very high standards set by BT. Sett in g u p Freestyle 1200 ready for use. 3 Insert battery in base unit 1 Handset aerial 2 Check your telephone wall socket 4 Plug the power cable into the back of the base unit 5 Connect the base unit three-pin adaptor to a power socket 6 Charge the handset 7 Plug the phone into the BT socket 8 Extend the base unit telescopic aerial 9 To wall mount your product Making and receiving calls Using your Freestyle1200 telephone Last number redial Using the memory to store and dial numbers # Page Using the Secrecy button Using the Intercom Page Changing the telephone settings Page Using your Freestyle 1200 answering machine Base Unit message display Display Definition Recording your outgoing message Setting the day and time Additional pre-set messages Switching the answer ing machine o n and off Recording a memo Playing messages and memos Page Page Call screening and intercep t Adjusting the speaker volume Answer delay Message alert Resetting the answer Operating the answering machine from the handset Remote access allows you to switch on and operate your answering machine from another phone. Accessing the answering Switching the answer ing machine o n Operating the answering Call Waiting BT Select Services Call Return (1471) Other services Freestyle 90/130/1200 Additional Handsets Registering your handset Setting the handset number Basic use of Freestyle additional handsets Transferring calls between handse ts Hel p Freestyle 1200, this section will give you the most common, easy-to-follow solutions. Page Page 40 Answer machine problems Possible cause Solution Need more help? Technical information Page Page Maintenance Page Page Index At a glance Introduct ion Settin g up Using Your Freestyle 1200 telephone Using Your Freestyle 1200 answering machine Remote access BT Select Servic es Wall mounting Fre estyle 90/130/1200 Additional Handsets Help Wall mounting Page Page APPROVED 504388 Offices in Europe, North America, Japan and Asia Pacific.