Manuals / Brands / Communications / Corded Headset / BT / Communications / Corded Headset

BT 1200 Basic use of Freestyle additional handsets, Transferring calls between handse ts

1 54

Download 54 pages, 830.77 Kb

Freestyle 90/130/1200 Additional Handsets

36

Basic use of Freestyleadditional handsets

Basic operation of additional

handsets is the same as that of your

Freestyle 1200 handset.

The handset range is up to 250

metres from the base unit in ideal

conditions. If you start to go out of

range while using the phone, you

will hear warning beeps. If you do

not come back in range, your call

will be disconnected.

To make a call

•Lift the handset off the charger.

•Press the TALK button. The TALK

light comes on and the handset

buttons illuminate.

•Listen for the dialling tone.

•Dial the number you want.

Like all cordless phones, the Freestyle

additional handset must be charged for

24 hours before initial use. To end a call

•Press the TALKbutton or r eplace

the handset.

Transferring calls between handse ts

Whilst on a call (ie. in talk mode):

•Press the SECRECY button.

•Enter the number of the handset

you want to transfer the call to.

The specified handset will ring.

•To answer the call, press the

TALKbutton.

If you do not hear a dialling tone after

pressing the TALKbutton, wait a few

seconds. On a few exchanges, there

may be a delay.

You cannot control the answering

machine from the 90/130/1200

additional handset, and it does not

have the call screening facility.

If the call is not answered, it is

returned to the original handset after

30 seconds. The original handset will

ring to let you know if this has

happened. To avoid having to wait 30

seconds for the call to be returned, you

can press the TALKbutton to cancel

the transfer of the call.

Contents

Main Page At a glance Freestyle 1200 In this guide I ntr oducti on been designed for ease of use and made to the very high standards set by BT. Sett in g u p Freestyle 1200 ready for use. 3 Insert battery in base unit 1 Handset aerial 2 Check your telephone wall socket 4 Plug the power cable into the back of the base unit 5 Connect the base unit three-pin adaptor to a power socket 6 Charge the handset 7 Plug the phone into the BT socket 8 Extend the base unit telescopic aerial 9 To wall mount your product Making and receiving calls Using your Freestyle1200 telephone Last number redial Using the memory to store and dial numbers # Page Using the Secrecy button Using the Intercom Page Changing the telephone settings Page Using your Freestyle 1200 answering machine Base Unit message display Display Definition Recording your outgoing message Setting the day and time Additional pre-set messages Switching the answer ing machine o n and off Recording a memo Playing messages and memos Page Page Call screening and intercep t Adjusting the speaker volume Answer delay Message alert Resetting the answer Operating the answering machine from the handset Remote access allows you to switch on and operate your answering machine from another phone. Accessing the answering Switching the answer ing machine o n Operating the answering Call Waiting BT Select Services Call Return (1471) Other services Freestyle 90/130/1200 Additional Handsets Registering your handset Setting the handset number Basic use of Freestyle additional handsets Transferring calls between handse ts Hel p Freestyle 1200, this section will give you the most common, easy-to-follow solutions. Page Page 40 Answer machine problems Possible cause Solution Need more help? Technical information Page Page Maintenance Page Page Index At a glance Introduct ion Settin g up Using Your Freestyle 1200 telephone Using Your Freestyle 1200 answering machine Remote access BT Select Servic es Wall mounting Fre estyle 90/130/1200 Additional Handsets Help Wall mounting Page Page APPROVED 504388 Offices in Europe, North America, Japan and Asia Pacific.