BT 1200 manual Plug the power cable into the back of the base unit, Charge the handset

4 Plug the power cable into the back of the base unit

12V AC

PHONE LINE

Plug the adaptor cable into the socket on the back of your Freestyle 1200.

Warnings

1 Do not try to use any power supply other than the one provided. This may permanently damage your Freestyle 1200.

2 Your Freestyle 1200 should not be fitted in wet or damp conditions, for example in a bathroom. Also, the handset should not be left out in the rain.

3 There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug the base unit from the mains during storms.

Setting up

5 Connect the base unit three-pin adaptor to a power socket

The unit will alternatively display --and C L flashing slowly. The internal clock will automatically be set to Saturday 12:01pm. To change the day and time, see page 21.

Mains power adaptor

The Freestyle 1200 must only be used with the adaptor supplied.

Using any other adaptor will result in non-compliance with EN60950:1992, and will invalidate the approval given to this apparatus.

6 Charge the handset

When you first use your Freestyle 1200, the rechargeable battery in the handset needs charging for 24 hours.

•Make sure you have connected your Freestyle 1200 to the mains power supply; see steps 4 and 5.

•Place the handset on the base unit, ensuring the contacts are touching. The red CHARGING light comes on.

•The CHARGING light remains on while the handset is on the base unit.

•When sufficiently charged for use, the CHARGING light turns green.

7