BT 3505 manual Time saver

5675 BT Synergy 3505 UG [4] 11/11/03 4:15 PM Page 51

BT Synergy 3505 – Edition 4 – 11.11.03 – 5675

Remote access 51

3. Press 7 within eight seconds. You will hear “Answer on”.

If you have any new messages, they will be played after you have entered your security code.

Check for messages

1.Dial your phone number. When you hear your outgoing message, press .

You will hear “Please enter your security code”.

2.Enter your 3-digit code. If you have new messages, you will hear “You have (n) new messages”, and they are played.

Or you will hear “You have no new messages, to hear main menu, press 1.”

If you enter your security code incorrectly, after the second attempt, your BT Synergy 3505 will announce: “Thank you for calling” and will hang up.

When you first dial in you will be prompted for the security code. If the code is not entered within 10 seconds you will be prompted again, if no code is entered within 10 seconds then your BT Synergy 3505 will hang up.

Time saver

If you have set the answer delay to Time Saver, your answering machine will answer after 2 rings if you have new messages. If you do not have new messages it will not answer until 6 rings. This enables you to hang up before you are connected, saving you the cost of a call.