5675 BT Synergy 3505 UG [4] 11/11/03 4:21 PM Page 70

BT Synergy 3505 – Edition 4 – 11.11.03 – 5675

70 General information

Dialling mode

1.Press then scroll to SETUP and press .

2.Scroll to DIALMODE and press .

3.Press or to select either TONE or PULSE and press to confirm.

Automatically insert a pause after access code

With some switchboards, you may be required to dial a pause after entering the switchboard access code (e.g. 9) to enable you to get an outside line.

This feature automatically inserts a pause between the access code and the telephone number you have entered in the phonebook. However, for this feature to work, you must still enter the access code before the telephone number when storing the number in the Phonebook.

1.Press then scroll to display SETUP and press .

2.Scroll to display PABX and press .

3.Scroll to PBX 1 and press to display PIN?

4.Enter the PIN (original code 0000) and press .

5.Enter the switchboard access code (e.g. 9) and press .

Page 70
Image 70
BT 3505 manual General information