Diverse 4010 Executive ~ 9th Edition ~ 17th July ~ 3662

Note

If all internal numbers have been assigned then the internal number 6 will be re-assigned.

You can change the internal handset number if you wish, see page 50.

To manually register a Diverse 4000 Executive handset to another base station

If you want to register your handset to another base station you will need to manually register it.

On the handset to be registered:

Menu Press the Menu options button.

Press the DOWN navigation button until the display shows H/Set Settings.

OK Press the OK options button.

Press the DOWN navigation button until the display shows Register H/Set.

OK Press the OK options button.

Press the DOWN navigation button to display the Base Station number you want Base 1, Base 2, Base 3, Base 4.

OK

OK

For example, if the handset is already registered at Base 1, you could set your base as Base 2.

Press the OK options button.

Enter the base station PIN (original setting = 0000)

Press the OK options button. Display shows Registr.

Procedure Base X.

If the base station is a Diverse 4010 or 4016 base press the PAGE button located underneath the base station for approximately one second. After approximately one minute the handset will display its internal number. The handset is now registered and the handset display will return to the idle screen.

If the base is not a 4010 or 4016 you will need to follow the user guide for the base station you are registering the 4000 handset to.

Press the RED PHONE button until you reach the idle display.

ADDITIONAL HANDSETS

51

Page 53
Image 53
BT 4010 Executive manual Procedure Base, On the handset to be registered