
Diverse 4016 Classic ~ Issue 2 ~ 6th Edition ~ 1st March ’02 ~ 4416
Base station settings
Base station PIN (Personal | OK Press the OK button to | ||||
Identification Number) |
|
|
|
| confirm. Display shows SAVED. |
Your base station PIN has a default |
|
|
|
| Press the RED PHONE button |
|
|
|
| ||
|
|
|
| to return to the idle screen. | |
setting of 0000 but you may want to |
|
|
|
| |
|
|
|
|
| |
change this to prevent unauthorised |
|
|
|
|
|
use of your handset(s). |
|
|
|
|
|
If you change your PIN keep a record of the new number by writing it in the space provided on page 10.
To change the base station PIN
MENU Press the MENU options button.
Press the DOWN button to highlight BASE SET.
OK Press the OK button.
Press the DOWN button to highlight SYSTEM PIN.
OK Press the OK button.
Enter current PIN (original setting 0000).
OK Press the OK button. Display shows NEW PIN.
Enter your new 4 digit PIN.
OK Press the OK button. Display shows REP PIN.
Enter your new 4 digit PIN again.
To adjust the base ringer volume
There are 5 levels to choose from (1 – 5), a ‘crescendo’ ring (6) that increases in volume, or you can switch the ringer off altogether (0).
MENU Press the MENU options button.
Press the DOWN button to highlight BASE SET.
OK Press the OK button. Display shows AUDIO SET UP.
OK Press the OK button.
Press the DOWN button until the display shows RINGER VOL.
OK Press the OK button. You hear the current volume and the level is shown on the display.
Press the DOWN button to select the required level.
OK Press the OK button to confirm.
Press the RED PHONE button until you reach the idle screen.
BASE STATION SETTINGS
35