BT 4100 manual Caller Display, Auto answer

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

16 Using the phone

Caller Display

If you have subscribed to your network’s Caller Display service, the caller’s number (or name

if stored in the phonebook) is displayed. See page 40 for more information.

Auto answer

As long as you have auto answer set to ON you can just pick the handset up off the base/charger to answer a call. If you have switched it off, you will need to press . Auto answer ON is the default setting.

Receive a call

When you receive a call, the phone rings and the Calls

light on the handset flashes. The or symbol flashes in the display to let you know if it is an external or internal call.

1.If your handset is on the base, pick it up to answer the call. Or

If your handset is off the base, press .

Earpiece volume

During a call you can adjust the volume of the earpiece/handset receiver.

1. Press Menu or Menu to increase or decrease the volume.

As you increase or decrease the volume, the boxes on the display show the volume level.

Maximum volume

Mid volume

Minimum volume

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com