BT 4100 Select Option, Use, Change the SIM Code, Select OK, Save. You hear a confirmation beep

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

28	Using the phone
	If your BT Synergy 4100 is		Access code
	connected to a switchboard, you
	may need to enter an access code	1.	Select		option.
	in the dialling sequence to be able
	to connect to the outside line.	2.	Use	Menu	or	Menu	to select Access code and press OK.
	The access code will not be used
	when you dial the number yourself	3.	On and Off are displayed as options. Either, select On to
	(rather than for example from the		activate prefix dialling. Code: is displayed. Enter the
	phonebook) to allow you to make
			prefix you require, e.g. 9 and select OK. You will hear a
	calls to other switchboard
	extensions.		confirmation beep and the display will return to the
			phonebook menu. Or, select Off to deactivate prefix
			dialling. The display will return to the phonebook menu.
			Change the SIM Code
		1.	Select		option. The phonebook entry you used last
	SIM Country Code		is displayed.
	These settings control the	2.	Select Opt, then use Menu or Menu to display SIM Code
	conversion of numbers from mobile		and select OK.
	format which may include +44 and
	may have the 0 removed from the	3.	Use		or	Menu	to select either Country Code, National
	area code. You should not normally			Menu
	need to alter these settings if you		Code or International Code and select OK.
	are using your BT Synergy 4100 in
	the UK and your mobile to call UK	4.	Using the keypad, enter the dialling code and select
	numbers. If this is not the case,		Save. You hear a confirmation beep.
	then please call the BT Synergy
	4100 Helpline for assistance on	5.	Press and hold				to exit and return to standby.
	0870 605 8047.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com