BT 4100 manual Problems copying numbers, Unavailable, Copy Phonebook Fail

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

26		Using the phone
	Problems copying numbers		5. At the receiving handset the display shows Replace
	If you try to copy a phonebook
			Phonebook? select OK to confirm.
	entry to another handset and the
	other handset is switched off, out		The display then shows Copying From Handset X. Each
	of range, or the number of the
	handset you have entered is		entry will then be copied in turn.
	unavailable, you will hear the
	error tone.		6. At the original handset a beep will confirm when all entries
	If you try to copy the entire		have been copied.
	phonebook to another handset and
	the other handset is switched off,		Press and hold	to exit and return to standby.
	out of range, or the number of
	the handset you have entered is
	unavailable, Copy Phonebook Fail		Copy to or from a SIM card
	will be displayed.
	Stored ringer melodies you have		With the ‘SIM copy’ feature you can copy entries from
	assigned to phonebook entries are		SIM Card to phonebook or from phonebook to SIM card.
	specific to the BT Synergy 4100
			So within minutes, you can have all your mobile contacts
	and will therefore not be copied to
	another type of handset.		saved onto your landline phone for quick and easy
			dialling.

Please note that you cannot remove the SIM tray from the base completely.

SIM copy/write is to and from one handset. To transfer entries to other handsets after SIM copy it is best to use the copy entry or copy phonebook command in the phonebook menu.

1.Insert the SIM card into the SIM READER slot on the side of the base.

2.Select option. The phonebook entry you used last is displayed.

3. Select Opt, then use Menu or Menu to to display SIM Copy and select OK.

4.Use Menu or Menu to display either Copy from SIM or Copy to SIM and select OK.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com